Aktionen
Werkarbeit druckenNach PDF konvertierenWerkarbeit bewertenVerlinkenWerkanleitung übersetzenWerkarbeit publizieren
Infos
LehrpersonenErfahrungsberichtePublikationskriterienRechtliche AspekteWettbewerbWer sind wir?
Sich anmelden
AnmeldenEinschreiben
FR | DE | EN
Die Plattform für wissenschaftliche und pädagogische Werkarbeiten

A coin top

This project goal is to create a nice top with a minimum of materials.

 

This project was developped for the magazine 'Campus Junior' of the University of Geneva.


Schwierigkeit
Sehr einfach
Dauer
20h
Benotung
4/5
Erfahrungsberichte
0

Material
Werkzeuge
Realisierung
Place a drawing pin (point up) in the center of a coin.   Push a piece of adhesif tape of about 5 cm through the pin. Turn the COIN over and pass the tape on another pin placed about 1mm from the centre of the coin.Surround the coin with another tape, perpendicular to the first on, fixing it on the two pins.Cut about 1cm of a pencil.   To do so, gradually cut the wood until it breaks effortlessly.Push the wooden part of the pencil (not the lead) on the top pin (the one slightly off-centre)Check that the bottom pin is right in the center of the coin.   Check that the pencil perfectly centered and ...
Anwendung
Links&Referenzen
Datum14.07.2022
Autorwebmaster
Organisationwebenergie
Übersetzerwebmaster
GebrauchBewegung erzeugen
BereichEnergie
Mechanik
Sprachefrançais english
Lizenz

Do-it-yourSciences, ein Projekt der Stiftung Juvene in Zusammenarbeit mit dem Espace des Inventions. Unterstützt wurde die Entwicklung von Info-Energie (campagne vaudoise d'information dans les écoles) und vom SIG (Services Industriels de Genève).

Datenschutz
Wir verwenden Cookies, um das Anwender-Erlebnis zu verbessern.
Ihre Daten werden nicht für Tracking verwendet oder mit Dritt-Parteien geteilt.
Akzeptieren